中文 English

What are the characteristics and related parameters of Jiachai Processing Center 850

2022-03-28 Source: Jasu Precision Machinery 1234 Editor: Jasu

The 850 processing center is the most commonly used processing center in the process of processing. In terms of the manufacturing of the processing center and CNC lathe, Jiachang has very rich experience, and its high quality has won general recognition. In this case, what are the characteristics of so fast 850 processing center? What is its parameters?


1. bed body


The JASU brand V-850D processing center adopts high-grade resin sand casting and box-type structure design and manufacturing. After time-effective processing and eliminating internal stress, tough material, and box structure design, the high-rigid body structure makes the machining center has sufficient rigidity The intensity shows the characteristics of high cutting capacity and high accuracy.


2. Transmission shaft


The X/Y/Z axis uses a linear high -speed roller slide design. The pillars, saddle, head and base are made of high -grade resin sand casting and box structure design. After computer analysis, the configuration of the ribs is strengthened to improve rigidity and stability.




3. Screw


The three -axis adopts a precision roller screw with a high -precision double nut pre -pressure. With the lock -pull design of the supporting seat at both ends, it can eliminate the error caused by the transmission back space and compensate for the temperature rise in advance to ensure the positioning accuracy.


4. Subdivy motor


The JASU brand V-V-850D vertical processing center uses a high-speed motor to make the machining center perform very well at high speed, low speed and light, and heavy cutting (power of 7.5/11kW).


5. The main axis


High -precision, high rigid main axis, it can withstand the heavy cutting of radial and axial loads and long -term heavy -time processing, and can process high accuracy of timely processing.


6. Blade (optional)


The discs of the disc, providing fast, stable, and reliable knife exchange actions. It is controlled by PLC software to quickly change the knife to reduce the non -cutting time.


7. Electric tank


Electric tanks are equipped with heat exchangers to ensure stability of the system. The external wiring part has protective snake tubes, which can resist heat and oil.


8. Lubrication system


JASU brand V-850D machining center automatically deducts lubrication system concentrated on oil to provide advanced deserted intermittent fuel supply systems, providing timely, quantitative, fixed pressure, and individual ways Each lubricating position is indeed when the lubrication oil is indeed, so that the processing center has no worries for a long time.


9. Full dense board gold


Under the strong requirements for environmental protection and the safety considerations of operators today, the design of the China solid machine on V-850D board gold focuses on the beauty, environmental protection and ergonomics. The full -sealing plate gold design completely prevent the cutting fluid and cutting fluid splashing outside the processing center, so that the surrounding of the processing center can be kept clean.




What is his parameter?


project


V-850


working desk size


1050 * 500


T -shaped slot specification


5*18*


Maximum load


1000kg


journey


X Y Z axis maximum itinerary


800 * 500 * 500


The distance from the spindle nose to the workbench


150-650


The distance from the center of the spindle to the column surface


550


Spindle


Spindle cone hole


BT40


Main axis maximum speed


8000rpm


Spindle transmission method


belt


Give up


Three -axis cutting into


5000mm/min/min


Three axis fast move speed


30/30/30 m/min


Rolling screw specification


X Y Z: 4010


Storage warehouse


Blade


Disk


Tool capacity


twenty four


The maximum diameter of the knife * length


80 * 200


Maximum knife


7kg


Knife specification


BT40


Change the knife time (knife to the knife)


BT40 discs <2.8 seconds


Servo


Spindle


7.5 / 11KW


X Y Z axial motor (Mitsubishi)


2.0/2.0/2.0kW


X Y Z axial motor (FANUC)


1.8/1.8/1.8kW


X Y Z axial motor (wide number)


3.9/3.9/3.9kW


Cooler


0.49kW


General specification


Qi source requirements


6kg


battery capacity


15kva


Dimensions


2.7*2.4*2.5 m


net weight


7.5T


Disclaimer: Part of the data information of the article comes from the Internet, and the content is for reference only. If there is any infringement, please contact us to modify or delete it in time!
All the official contents and pictures are prohibited from collecting or mirroring, otherwise the consequences will be at their own risk!
400-889-7879