What are the characteristics and related parameters of JASU Machining Center 850

850 machining center is one of the most commonly used machining centers in the machining process. JASU has rich experience in manufacturing machining centers and CNC lathes, and its high quality has won widespread recognition. In this case, what are the characteristics of JASU's 850 machining center? What are its parameters?

1. Bed

JASU brand V-850D machining center is made of advanced resin sand casting and box structure design. After aging treatment, the internal stress is eliminated, and the material is tough. With the box structure design and high rigid body structure, the machining center has enough rigidity and strength, and the whole machine shows the characteristics of cutting resistance and high precision.

2. Drive shaft

X/Y/Z axis adopts linear high-speed roller slide design. The column, saddle, head and base are designed and manufactured by advanced resin sand casting and box structure. The configuration of reinforcing rib is analyzed by computer to improve the rigidity and stability.

3. Screw rod

The three-axis adopts high-precision double nut preloading precision ball screw, and the locking design of the support seats at both ends can eliminate the transmission backlash and pre compensate the error caused by temperature rise to ensure the positioning accuracy.

4. Spindle motor

JASU V-V-850D vertical machining center adopts high speed motor, which makes the machining center perform very well in high speed, low speed, light and heavy cutting (power up to 7.5/11kw).

5. Spindle head

High precision and high rigidity spindle head, which can withstand heavy cutting of radial and axial loads and long time heavy cutting, and can maintain high precision of machining.

6. Tool magazine (optional)

The disc type tool magazine provides fast, stable and reliable tool exchange action, which is controlled by PLC software. The fast tool change action reduces the non cutting time.

7. Electric box

The electrical box is equipped with a heat exchanger to ensure the stability of the system. The external wiring part is equipped with a protective coil, which can withstand heat, oil and water.

8. Lubrication system

JASU V-850D machining center's automatic depressurization lubricating system provides centralized oil supply. With an advanced depressurization intermittent oil supply system, it provides timely and appropriate oil supply to each lubricating point in a timed, quantitative, constant pressure and individual way to ensure that each lubricating position receives lubricating oil at the right time, so that the machining center can operate for a long time without worries.

9. Full dense sheet metal

Under the strong requirements of environmental protection and operator safety, the V-850D sheet metal design of the medium solid finishing machine focuses on beauty, environmental protection and ergonomics. The fully sealed sheet metal design completely prevents the cutting fluid and cutting fluid from splashing outside the machining center, so that the periphery of the machining center can be kept clean.

What are his parameters?

project

V-850

Table size

1050 * 500

T-groove specification

5*18*

Maximum load

1000KG

trip

X Y Z axis maximum stroke

800 * 500 * 500

Distance from spindle nose to workbench

150-650

Distance from spindle center to column face

five hundred and fifty

principal axis

Spindle taper hole

BT40

Maximum spindle speed

8000RPM

Spindle transmission mode

Belt

feed

Three axis cutting feed

5000mm/min

Three axis fast moving speed

30/30/30 m/min

Specification of ball screw

X Y Z：4010

Knife storage chamber

Tool magazine form

Disc type

Tool capacity

twenty-four

Max. tool diameter * length

80 * 200

Maximum tool weight

7KG

Tool handle specification

BT40

Tool change time (tool setting)

BT40 disc type<2.8s

Servo motor

Spindle motor

7.5 / 11KW

X Y Z axis motor (Mitsubishi)

2.0/2.0/2.0KW

X Y Z axis motor (FANUC)

1.8/1.8/1.8KW

X Y Z axis motor (Guangzhou)

3.9/3.9/3.9KW

Cooling motor

0.49KW

General specifications

Air source requirements

6KG

Power capacity

15KVA

Overall dimensions

2.7*2.4*2.5 M

Net weight

7.5T